build(deps): bump filippo.io/edwards25519 from 1.1.0 to 1.1.1

Bumps [filippo.io/edwards25519](https://github.com/FiloSottile/edwards25519) from 1.1.0 to 1.1.1.
- [Commits](https://github.com/FiloSottile/edwards25519/compare/v1.1.0...v1.1.1)

---
updated-dependencies:
- dependency-name: filippo.io/edwards25519
  dependency-version: 1.1.1
  dependency-type: indirect
...

Signed-off-by: dependabot[bot] <support@github.com>

README.md

@@ -126,13 +126,17 @@ The procedure to issue a release is as follows:
     claude --permission-mode default '/draft-release v0.7.0'
     ```
     This command will verify that artifacts are ready, create the draft release, and upload all artifacts.
-  * Review the draft release on GitHub, then publish.
+  * Review the draft release on GitHub, then publish,
+    with the box checked to create a GitHub "Discussion" for the release.
+* Immediately after hitting publish.
+  * Update the release on GitHub to link to the discussion.
+  * Update `docs/changelog.rst` to link to the GitHub release.
+  * Update `docs/_templates/versions.html` to link to the GitHub release.
+  * Announce release in the zrepl Matrix channel & other socials as applicable.
+    Link to the GitHub release as the entrypoint.
+* After a couple of days
   * Add the .rpm and .deb files to the official zrepl repos.
     * Code for management of these repos: https://github.com/zrepl/package-repo-ops (private repo at this time)
-* Update docs version list:
-  * Update `docs/_templates/versions.html` with the new release.
-  * Verify the link to `zrepl-noarch.tar` in the GitHub release works.
-  * Merge to `master` (docs auto-publish).
 
 #### Patch releases, Go toolchain updates, APT/RPM Package rebuilds
 

docs/_templates/versions.html

@@ -7,6 +7,7 @@
   <div class="rst-other-versions">
     <dl>
       <dt>Releases</dt>
+      <dd><a href="https://github.com/zrepl/zrepl/releases/tag/v0.7.0">v0.7.0</a></dd>
       <dd><a href="https://github.com/zrepl/zrepl/releases/tag/v0.6.1">v0.6.1</a></dd>
       <dd><a href="https://github.com/zrepl/zrepl/releases/tag/v0.5.0">v0.5.0</a></dd>
       <dd><a href="https://github.com/zrepl/zrepl/releases/tag/v0.4.0">v0.4.0</a></dd>

docs/changelog.rst

@@ -16,6 +16,8 @@ Changelog
 0.7.0
 -----
 
+`GitHub Release <https://github.com/zrepl/zrepl/releases/tag/v0.7.0>`_
+
 * |feature| Config file inclusion using ``include`` directive.
   This allows distributing zrepl job definitions across multiple YAML files in a ``conf.d`` style directory.
   (:commit:`4d6583e`, thanks, `@ZeyadTamimi <https://github.com/zeyadtamimi>`_).

docs/installation/user-privileges.rst

@@ -3,56 +3,10 @@
 User Privileges
 ---------------
 
-zrepl can run as an unprivileged user with `ZFS delegation <https://www.freebsd.org/doc/handbook/zfs-zfs-allow.html>`_.
+It is possible to run zrepl as an unprivileged user in combination with
-**Help us document working setups on this page** by opening a PR!
+`ZFS delegation <https://www.freebsd.org/doc/handbook/zfs-zfs-allow.html>`_.
+Also, there is the possibility to run it in a jail on FreeBSD by delegating a dataset to the jail.
 
-.. NOTE::
+.. TIP::
 
-   Keep in mind that ``zfs send``/``recv`` was never designed with
+    Note: check out the :ref:`installation-freebsd-jail-with-iocage` for FreeBSD jail setup instructions.
-   untrusted input in mind. An attacker controlling the send-recv stream could probably crash the
-   receive-side kernel, exploit bugs to get code execution, or induce stateful damage to the receive-side pool.
-
-
-Known Working Setups
-^^^^^^^^^^^^^^^^^^^^
-
-.. list-table::
-   :header-rows: 1
-   :widths: 15 40 20
-
-   * - OS
-     - Use Case
-     - Last Tested Version
-   * - Linux
-     - sink job (receiving)
-     - v0.7.0
-
-.. _installation-user-privileges-my-example-setup:
-
-My Example Setup
-^^^^^^^^^^^^^^^^
-
-I'm on Linux (Ubuntu ...) and run ``zrepl daemon`` as an unprivileged user, using a custom systemd unit file.
-
-:: code-block:: bash
-   ...
-   [Service]
-   User=zrepl
-   Group=zrepl
-   ...
-
-I set up the ZFS persmissions as follows:
-
-.. code-block:: bash
-
-   # receiving side root filesystem
-   zfs allow -u zrepl bookmark,create,destroy,hold,mount,mountpoint,receive,refreservation,userprop backuppool/zrepl
-   # sending side
-   zfs allow -u zrepl bookmark,destroy,hold,send,userprop prodpool
-
-**Notes:**
-
-* ``snapshot`` is NOT needed for receiving (only for pruning operations)
-* ``refreservation`` avoids non-sparse volume issues on receiving side
-* Add ``snapshot`` if your jobs perform sender or receiver-side pruning
-* Encryption and other features may require additional permissions

go.mod

@@ -39,7 +39,7 @@ require (
 )
 
 require (
-	filippo.io/edwards25519 v1.1.0 // indirect
+	filippo.io/edwards25519 v1.1.1 // indirect
 	github.com/felixge/fgprof v0.9.5 // indirect
 	github.com/gabriel-vasile/mimetype v1.4.13 // indirect
 	github.com/google/pprof v0.0.0-20260202012954-cb029daf43ef // indirect

go.sum

@@ -1,5 +1,5 @@
-filippo.io/edwards25519 v1.1.0 h1:FNf4tywRC1HmFuKW5xopWpigGjJKiJSV0Cqo0cJWDaA=
+filippo.io/edwards25519 v1.1.1 h1:YpjwWWlNmGIDyXOn8zLzqiD+9TyIlPhGFG96P39uBpw=
-filippo.io/edwards25519 v1.1.0/go.mod h1:BxyFTGdWcka3PhytdK4V28tE5sGfRvvvRV7EaN4VDT4=
+filippo.io/edwards25519 v1.1.1/go.mod h1:BxyFTGdWcka3PhytdK4V28tE5sGfRvvvRV7EaN4VDT4=
 github.com/beorn7/perks v1.0.1 h1:VlbKKnNfV8bJzeqoa4cOKqO6bYr3WgKZxO8Z16+hsOM=
 github.com/beorn7/perks v1.0.1/go.mod h1:G2ZrVWU2WbWT9wwq4/hrbKbnv/1ERSJQ0ibhJ6rlkpw=
 github.com/bits-and-blooms/bitset v1.24.4 h1:95H15Og1clikBrKr/DuzMXkQzECs1M6hhoGXLwLQOZE=